It’s no news that Australians are now investing in solar systems with each passing year. It’s almost like people are losing faith in the power our hydro dams provide us. Thankfully, the sun provides us with a renewable source of energy that can be converted to power with the right equipment. 

This equipment may comprise some of the most fragile materials you could ever find on electronics. The silicon wafers, which are the most fragile components of any solar system, are extremely crucial parts of the machine and must be taken care of. This means precise installation and maintenance. 

Experts say there are factors to consider when installing a solar system on your roof. Taking each factor into consideration could save a ton of time and money in the long run. Lucky for you, we’ve helped you compile all those factors into a single blog post. Keep scrolling down as you find out the DOS and don’ts of installing a solar system in Sydney.

1. Reshape your roof (if needed)

There are many roof shapes and sizes. If you contain your panel, then you’re lucky. If yours can’t, you may want to find other ways to install your panels to receive the maximum amount of sunlight. 

2. Check for the maximum weight your roof can carry

This is a critical part of the installation process. If the solar power system will make your roof overweight, consider installing it somewhere else. If not, your entire house stands the risk of collapse because of all that weight. 

3. Plan for nature’s element of surprise

No matter how much we hate to admit it; there’s no escape to all the stormy nights we’d be experiencing soon. This nature’s element of surprise is something you have to plan carefully. Will your insurance cover repair costs if one of the panels gets damaged? 

This is important. Especially if you live in a place like Sydney where the weather can get a little funky.

4. Plan for water runoffs

Water drainage systems are usually pre-installed on your roof to prevent the rainwater from damaging your roof. However, you’d need an unrestricted flow of water to prevent any roof damages in the near future. 

Unfortunately, these solar panels come with wiring and harnesses which may restrict the free flow of rainwater. This, in turn, could cause water-related damages in the long run. To prevent your rooftop from any solar panel-related damages, inform your contractor of these concerns. They can come up with the best compromise for your solar system. 

5. Check out other contractors

We strictly advise against employing the first contractor you interview. You may not know it but picking the first contractor isn’t always best. Doing proper research, checking out other installation agencies, and finding out appreciable service charges in Sydney would go a long way in making things work out for you. 

6. Only employ a contractor you can TRUST

Installing a solar system in Sydney can be considered both a renovation or home improvement project and an electrical project. That’s why you have to employ the right people for the job. A lightning surge destroying your solar panels sure spells out a poor installation. 

Make sure your contractor has the necessary credentials to prove his authenticity in the job. Also, make sure their company has been existing long enough to deal with major and minor problems. A good place to start would be to ask about their reputation.

7. Invest your money in affordable (not cheap) solar systems

The cheaper option seldom translates to the best option. If you’re someone looking to use their solar system for years to come, then installing a cheap solar panel isn’t the right way to go. The goal is to get a system that’s not only durable but won’t break your bank. The thing is; cheaper solar systems are manufactured in a way that makes them last less long than the more expensive ones. 

8. Getting the right insurance

A lot of homeowners seem to think insurance should come from the company alone. What they don’t know is that they’re also mandated to have insurance for their homes as well. There are countless hazards both you and your contractor are exposed to during the installation process. Should the impossible happen, you need to be prepared to handle repairs without any hassle.

9. Avoid DIY installation

Technical operations like installing a solar system in Sydney should never be done by inexperienced hands. That YouTube video which makes installing these appliances so easy is done by a seasoned pro. unless you’ve acquired an apprenticeship from one of these agencies beforehand, don’t try solar system installations at home. 

10. Know a lot about rebates in Sydney before installation

A rebate is a partial refund given to a person who’s spent way too much on a particular utility. Before employing your ideal contractor, ask them about their options. If they don’t have any ones, inform them of any rebates offered by the Australian government. These rebates are meant to encourage home and business owners to invest in green energy sources like solar energy. 

11. Make necessary roof repairs (if needed)

Before beginning your big solar project, we strongly advise you consider your roof’s age and integrity. If you’re going to be needing a new roof any time soon, then you should deal with that before installing your solar system. The same goes for the repairs. 

There you have it! 11 whopping factors you need to take care of before installing solar systems in Sydney. Remember to ALWAYS discuss things with your contractor to get their views on your decisions. Oh! And leave the installation to the professionals. You don’t want to spend $15,000-$45,000 in vain. 

Disclaimer: This is a generic Information & post; content about the services can be changed from time to time as per your requirements and contract. To get the latest and updated information, contact us today or visit our website.